Excavator maintenance method

Thank you very much for your question. The following is the relevant information about the maintenance method of the excavator.

daily cleaning

During the use of the excavator, it will be eroded by a large amount of dust, mud, sand and other impurities, which will accelerate the wear and corrosion of the machine. Therefore, in order to prolong the service life of the excavator, daily cleaning is very important. Specific methods include:

Use a high-pressure water gun to clean the surface of the machine, especially the inside of the machine and the surface of the radiator.

When cleaning the radiator, care should be taken not to point the high-pressure water gun directly at the radiator chip to avoid damage.

After daily use, the machine should be cleaned and inspected briefly to ensure that the machine is in good working condition.

Lubrication and maintenance

Lubrication maintenance is an important part of excavator maintenance. Improper lubrication will lead to parts wear, oil leakage and other problems. Therefore, lubrication maintenance should be given enough attention. Specific methods include:

Lubricate according to machine manual.

Regularly replace lubricating oil and hydraulic oil.

The lubricating points should be checked and cleaned frequently to ensure that the lubricating oil can flow smoothly to the lubricating parts.

Periodic inspection

During the working process of the excavator, the parts of each part will have different degrees of wear and tear. Therefore, regular inspection is very necessary. Specific methods include:

Regularly check all parts of the machine, especially the easy-wear parts such as wire ropes, chains, tires, and crawlers.

Check whether the hydraulic system is working normally and whether there is any oil leakage.

Check whether the engine is working normally, whether there is any abnormal noise or other abnormal phenomena.

Check whether the electrical system is working normally, and whether there are problems such as line aging and poor contact.

Maintenance

During the use of the excavator, it is inevitable that various failures will occur. Therefore, maintenance is also very important. Specific methods include:

For some minor faults, you can handle them yourself.

For some relatively large faults, professional and technical personnel should be contacted in time to deal with them.

For maintenance, original parts or standard parts should be used.

The above is the relevant information about the maintenance method of the excavator. Hope this information can help you. If you have further questions, please feel free to contact me.